First
Download the ZiPhone
http://downloadziphone.org/ZiPhone2.3.zip
http://zibree.blogspot.com/
For AnySim old version make sure your iPhone have do the re-virgin
Use iTune 7.6 update to 1.1.3
run ziphoneGUI.exe
click Unlock, Active, Jailbreak then start
wait 2:30 then enjoy your phone
if your BL is 4.9 can click downgrade bootloader
Enjoy your phone.
2008年2月17日 星期日
2008年1月21日 星期一
1.1.2 OTB Unlocked (take your own risk)
First of all, HUGE thanks to TA_Mobile and IMTH for getting us the secpack from 1.1.3 Also, thanks to psp_sully for giving me a 1.1.2 OTB phone to play with. Without them there would be no unlock, and no blog post.
YOU VERY WELL MAY BRICK YOUR PHONE WITH THIS. Be careful. I have done it sucessfully on two phones, and have never bricked an iPhone in my life.
So lets get down to business. It is a hardware method to downgrade the bootloader, and I am assuming you are familiar with the old hardware method, so I won't repeat steps. You need to have a 1.1.2 4.6 phone for this to work. If you upgraded to 1.1.3, have fun waiting for 1.1.4!
First download this pack, you will need these files. This includes the NEW secpack, a new ieraser, a new testcode.bb, and a new iunlocker.
1. Copy all the files to a directory on your phone. It is imperative you do not shut off the phone after ieraser, or you cannot restore wifi, since the only fls which works on 4.6 is 1.1.3 Install mobileterminal before you begin, in case you lose wi-fi. Also I advise doing this on 1.0.2, since resetting the baseband doesn't cause problems.
2. Run ienew. This is ieraser, and it erases your 1.1.2 firmware to allow the testpoint to work.
3. Find an old 3.9 nor dump and create a file called "nor" with the first 0x20000 bytes of the old nor dump. This is the 3.9 bootloader.
4. Copy "nor" into the folder and run iunew. This is iunlocker and runs just like the old one. You will need the A17 testpoint on before running this. See Step 3 for info on this testpoint. If you restarted and lost wi-fi, it is fine. Just run it from mobileterminal.
Note: "bbupdater -v" shouldn't work at this point, since your phone has no firmware, just a bootloader.
5. The bootloader is now 3.9!!! Run bbupdater -f or restore phone with the AnySimmable firmware of your choice. It seems people are having the most luck with the firmware from 1.1.2
6. Run AnySim and, as usual, enjoy your unlocked iPhone.
PS. Thanks again to TA_Mobile and IMTH. The secpack was the only obstacle to the unlock. And thanks to the girl who pressed the return button while I held the testpoint :)
YOU VERY WELL MAY BRICK YOUR PHONE WITH THIS. Be careful. I have done it sucessfully on two phones, and have never bricked an iPhone in my life.
So lets get down to business. It is a hardware method to downgrade the bootloader, and I am assuming you are familiar with the old hardware method, so I won't repeat steps. You need to have a 1.1.2 4.6 phone for this to work. If you upgraded to 1.1.3, have fun waiting for 1.1.4!
First download this pack, you will need these files. This includes the NEW secpack, a new ieraser, a new testcode.bb, and a new iunlocker.
1. Copy all the files to a directory on your phone. It is imperative you do not shut off the phone after ieraser, or you cannot restore wifi, since the only fls which works on 4.6 is 1.1.3 Install mobileterminal before you begin, in case you lose wi-fi. Also I advise doing this on 1.0.2, since resetting the baseband doesn't cause problems.
2. Run ienew. This is ieraser, and it erases your 1.1.2 firmware to allow the testpoint to work.
3. Find an old 3.9 nor dump and create a file called "nor" with the first 0x20000 bytes of the old nor dump. This is the 3.9 bootloader.
4. Copy "nor" into the folder and run iunew. This is iunlocker and runs just like the old one. You will need the A17 testpoint on before running this. See Step 3 for info on this testpoint. If you restarted and lost wi-fi, it is fine. Just run it from mobileterminal.
Note: "bbupdater -v" shouldn't work at this point, since your phone has no firmware, just a bootloader.
5. The bootloader is now 3.9!!! Run bbupdater -f or restore phone with the AnySimmable firmware of your choice. It seems people are having the most luck with the firmware from 1.1.2
6. Run AnySim and, as usual, enjoy your unlocked iPhone.
PS. Thanks again to TA_Mobile and IMTH. The secpack was the only obstacle to the unlock. And thanks to the girl who pressed the return button while I held the testpoint :)
2008年1月17日 星期四
Becareful iPhone Firmware 1.1.3
Firmware 1.1.3 is now released, all cracked iPhone becareful to upgrade accidentally
And it can't be downgrade after upgrade to 1.1.3
http://www.engadget.com/2007/12/30/iphones-upgraded-to-1-1-3-cant-be-downgraded/
From hackint0sh
http://www.hackint0sh.org/forum/showthread.php?t=22079
And it can't be downgrade after upgrade to 1.1.3
http://www.engadget.com/2007/12/30/iphones-upgraded-to-1-1-3-cant-be-downgraded/
From hackint0sh
http://www.hackint0sh.org/forum/showthread.php?t=22079
iTery
這件稱為iPhone的威力彈夾,就是當我們需要額外電力支援的時候
只要這樣接上去,就像手槍裝彈夾一樣,咖喳
就可以繼續維持你的戰力,繼續講電話,或是做其他的事情啦
他還會有一個藍色燈號
對,你只要插回你原本的dock,就可以幫他充電了...
當然也可以插著線來充電,你幫iTery 充電,iTery幫你的iPhone充電
iTery由於體積的緣故,所以只能將你的iPhone回充至五分飽,但是他就挾著完整性與便利性勝出
我們測試過可以同時差五個在dock上面充電,反正充電交給他,我們睡覺去,隔天就有五個彈夾加上iPhone夠我們出門或是出差使用...
你常外出,而沒有充電的機會嗎?
這幾個解決方案,供你參考喔
看來應該來研發一個戰術背心,或是戰術S腰帶,來放這些彈夾以及主體(iPhone)呵呵~
轉自~weiphone.com
只要這樣接上去,就像手槍裝彈夾一樣,咖喳
就可以繼續維持你的戰力,繼續講電話,或是做其他的事情啦
他還會有一個藍色燈號
對,你只要插回你原本的dock,就可以幫他充電了...
當然也可以插著線來充電,你幫iTery 充電,iTery幫你的iPhone充電
iTery由於體積的緣故,所以只能將你的iPhone回充至五分飽,但是他就挾著完整性與便利性勝出
我們測試過可以同時差五個在dock上面充電,反正充電交給他,我們睡覺去,隔天就有五個彈夾加上iPhone夠我們出門或是出差使用...
你常外出,而沒有充電的機會嗎?
這幾個解決方案,供你參考喔
看來應該來研發一個戰術背心,或是戰術S腰帶,來放這些彈夾以及主體(iPhone)呵呵~
轉自~weiphone.com
訂閱:
文章 (Atom)